12V 100AH Telecom Tower Batteries For Communication Infrastructure Base Station

I. Core Parameters

• Rated Voltage: 12V
• Rated Capacity: 100Ah (C10 rate, 1.80V per cell)
• Dimensions (L×W×H): 330×172×218mm, fully compatible with standard base station cabinets
• Charging Voltage: Float 13.6–13.8V; Cycle 14.4–14.8V
• Self-discharge Rate: ≤2%/month at 25℃, allowing long-term storage without frequent recharging
• Operating Temperature Range: -20℃～50℃
• Design Service Life: 10 years under floating charge at 25℃

II. Key Advantages

• GP Series Quality Assurance: Adhering to GP’s strict manufacturing standards and quality control system, the battery offers consistent and reliable performance, meeting the high-demand backup power requirements of base stations and communication infrastructure.
• Optimized 120AH Capacity: The 100Ah capacity strikes a perfect balance between standby duration and cabinet space utilization, accurately matching the power consumption needs of base station equipment and communication infrastructure.
• Reliable Emergency Power Support: Tailored for base station scenarios, it delivers stable power supply during sudden power failures, effectively preventing interruptions to telecom services and data transmission.
• Sealed & Maintenance-Free Operation: Adopts a valve-regulated sealed structure paired with an AGM separator, achieving zero leakage, no need for regular maintenance, and safe operation in closed base station cabinet environments.
• Superior Discharge Stability: Equipped with reinforced grids and thickened plates, it ensures steady high-current output and excellent deep discharge recovery, providing reliable emergency power support when needed.
• Strong Adaptability to Harsh Environments: With a low self-discharge rate and wide operating temperature range, it can work stably in outdoor base stations and complex harsh conditions, reducing operation and maintenance costs significantly.

III. Typical Applications

1. Backup power for macro and micro base stations
2. DC standby power for communication infrastructure and core telecom equipment
3. UPS/EPS backup systems for communication network projects
4. Backup power for outdoor base station cabinets and underground communication nodes

IV. Installation & Maintenance Guidelines

• Installation: Install the battery with terminals facing outward, arrange in single or double rows in base station cabinets, reserve adequate heat dissipation gaps; conduct anti-oxidation treatment on terminals after installation to avoid poor contact.
• Maintenance: It is recommended to operate in floating charge mode at 25℃ (battery life will be halved for every 10℃ increase in ambient temperature); regularly check terminal condition and battery shell, and address abnormalities promptly.